ABS Door Specifications
for Internal & Toilet Doors
A) Specification for Foamed PVC Door Frame
Providing of factory made pre-laminated FPVC (Foamed Polyvinyl Chloride) Door frame of the size 140x40mm with a wall thickness of 10mm made out of extruded rigid FPVC profile mitre joined with 6 Nos. of 50mm long screw. The door frame shall be fixed to the wall by using 80mm long screws through the frame with the help of PVC fasteners of 3 no's to be provided for each vertical member, GI stiffeners of ("U" channel of size 29x9x1mm, 150mm long) -3 no's at hinge point, Frame reinforcement of("U" GI channel of size 46x22x.06mm), Bottom tie rod of ("U" GI channel size of 15x15x1mm) etc. complete as per manufacturers specification for finished item of work. Maximum door frame size : 980 x 2070
B) Specification for ABS Shutter
Providing of 35mm thick factory made pre-laminated ABS (Acrolynitrile Butadyne Styrene) Door shutter moulded in different designs, consisting of all round frame made out of water proof solid foam PVC bar of size 20x32mm, reinforced by 32x32mm - 2 nos. for vertical made out of LVL (Laminated Veneer Lumber), core material of 32 mm thick high density craft paper honey comb board, sandwiched on both sides with pre-laminated ABS sheet thickness of 1.5mm . PVC edge banding of size 0.45mm on the vertical sides. Hardware made out of steel coated butterfly hinges - 3 Nos. for each shutter and ISI make S.S round lock complete for finished item of work. Maximum shutter size: 910 x 2030 mm
